Pressure Control - Gap SIM 2203

Model Description

The TSC Sim 2203 – Gap Pressure Control Simulation shows a vertical closed pressure vessel being fed with a supply of nitrogen. The nitrogen exits the vessel through a single line with a valve controlling the flow.

The pressure in the vessel is controlled by a gap pressure controller directly controlling the position of the valve on the exit stream. The gap controller allows the vessel to fill up to a set pressure before allow the vessel to empty down to another set pressure, before beginning to fill again.

The feed to the vessel can be varied by introducing a second flow of gas to test the effect on the pressure control system.

Disturbances can be added to the upstream and downstream pressures of the system to allow realistic learning on how the control method responds to the type of disturbances found on a real plant.

The P&ID settings of the controller can be altered to improve the tuning of the controller for the various conditions that can be created.

The simulation includes exercise’s based around the tuning of the pressure control system.

Learning Areas

  • Introduction to mass balance.
  • Introduction to process control.
  • Introduction to compressibility.
  • Introduction to the use of gap control.
  • Benefits of gap control.

 

Add to Quote Basket

Back to Process Control