Pressure Control - Ratio & Cascade SIM 2207

The TSC Sim 2207 – Ratio and Cascade Pressure Control Simulation shows a vertical closed pressure vessel being fed with a supply of nitrogen. The nitrogen exits the vessel through a single line with a valve controlling the flow.

The pressure in the vessel is indirectly controlled by a flow controller on the vessel outlet flow taking its set point from the inlet flow to the vessel. This set point can be altered by applying a ratio variable multiplied by the inlet flow to allow the vessel to be slowly filled or emptied even with a variable inlet flow.

The feed to the vessel can be varied by introducing a second flow of gas to test the effect on the pressure control system.

Disturbances can be added to the upstream and downstream pressures of the system to allow realistic learning on how the control method responds to the type of disturbances found on a real plant.

The P&ID settings of the controller can be altered to improve the tuning of the controller for the various conditions that can be created.

The simulation includes exercise’s based around the tuning of the pressure control system.

Learning Areas

  • Introduction to mass balance.
  • Introduction to process control.
  • Introduction to compressibility.
  • Benefits of ratio control.

 

Add to Quote Basket

Back to Introduction